Klein 600-6 HD Keystone Tip Shank Screwdriver 5/16"

Klein 600-6 HD Keystone Tip Shank Screwdriver 5/16" Review

Klein 600-6 HD Keystone Tip Shank Screwdriver 5/16" 6" Heavy-duty square shank for wrench-assisted turning. Bolster reinforces shank for hard use. Designed for the most demanding uses.

TIF Instruments AC Refrigerant Leak Detector - TIFXL1A

TIF Instruments AC Refrigerant Leak Detector - TIFXL1A Review

Features and Benefits:

• Microprocessor controlled circuit monitors the sensing tip up to 2000 times per second
• Detects all Halogenated refrigerants
• Ultimate sensitivity (0.4oz/yr.); sensitivity level:1
  
• 14" Flexible stainless steel probe with Teflon™ liner
  
• UL Classified and CE approved

Portable and cordless; uses 2 "C" cell batteries (included). Constant power indication. sensing tip life: approximately 20 hours (two tips included). Operating temperature: 30 degrees to 125 degrees F. Packaged in a blow molded carrying case. Certified to SAE J1627 with a 2 year warranty.

WaterTell Leak Detection Alarm w/ Output Relay

WaterTell Leak Detection Alarm w/ Output Relay Review

WaterTell Leak Detection Alarm w/ Output Relay Feature

• Single output relay (3 amps)
• 120V AC power
• 9V alkaline battery backup
• Includes: 6ft. non-sensing leader cable, 4ft. leak detection cable, 5 cable clips.

The WaterTell Leak Detection Alarm and cable detects leaks beyond a single spot, up to 50 feet. Water anywhere along the cable triggers the alarm. Around appliances, along walls, into recesses where water collects - WaterTell is there. Additionally, this unit can be connected to an automatic water shutoff valve (sold separately) that allows for the ultimate in home leak protection. When a leak is detected, the WaterTell Leak Detection Alarm signals the automatic shutoff valve (via the output relay) to close, preventing additional water leakage. The output relay is rated for 3 amps at 30VDC/250VAC max. Unit Includes: - WaterTell alarm controller with an 80dB alarm and relay output - 120V AC power supply (optional 9V alkaline battery backup, battery not included) - 6ft. non-sensing leader cable - 4ft. leak detection cable - 5 adhesive cable clips - Double-sided wall mount tape strip

Fluke 321 Clamp Meter

Fluke 321 Clamp Meter Review

Fluke 321 Clamp Meter Feature

• New smaller size fits easily into tight places
• Continuity test function for quick checking of shorts
• Precise measurements with 1.8-Percent basic accuracy
• Automatic low battery indicator
• Display hold function

Big features, small package The Fluke 321 is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged clamp meter is ideally suited for current measurements up to 400 A in tight cable compartments. Features: This affordable instrument combines a compact package with a strong feature set: New smaller size fits easily into tight places Precise measurements with 1.8% basic accuracy Resolution up to 0.01A and 0.1 V Measures AC current to 400 A Measures AC volts to 600 V Resistance measurement to 400 Ω Continuity for quick checking of shorts Automatic low battery indicator Display hold function Two year warranty Specifications: Resolution: 0.1 V Resolution: 1 V Accuracy: 1% ± 5 counts Voltage AC Range: 0 - 400 V Resolution: 0.1 V Accuracy: 1.2% ± 5 counts (50 - 400 Hz) AC Response: Averaging Current AC Range: 0 - 400 A Resolution: 0.1 A Accuracy: 1.8% ± 5 counts (50 - 60 Hz) Accuracy: 3.0% ± 5 counts (60 - 400 Hz) AC Response: Averaging Resistance Range: 0 - 400 Ω Resolution: 0.1 Ω Accuracy: 1% ± 5 counts Continuity: Environmental Specifications Operating Temperature: -10°C to +50°C Storage Temperature: -30°C to +60°C Operating Altitude: 2,000 meters Temperature De-rating: Add 0.1 x specified accuracy for each °C above 28°C or below 18°C Safety Specifications Safety Rating: IEC 1010-2-032, 600V CAT III Mechanical & General Specifications Size: 190 x 63 x 35 mm Weight: 230 g Warranty: Two years Battery Life: 100 hours typical (2 AAA carbon zinc) Jaw Opening: 25 mm

Reliance Controls THP205 Sump Pump Alarm and Flood Alert

Reliance Controls THP205 Sump Pump Alarm and Flood Alert Review

Reliance Controls THP205 Sump Pump Alarm and Flood Alert Feature

• Reliable and loud sump pump/flood alarm
• 105-decibel alarm
• Includes wall mounting hardware
• UL Listed
• 1-year manufacturer's warranty

The Reliance Controls sump pump alarm and flood alert comes complete with a 60-inch water sensor wire. For maximum versatility, the kit includes a weighted probe tip that can optionally be suspended at any level to detect rising water. The sensor tip features a suction cup mount that can be affixed to any hard, non-porous surface, such as a toilet tank, bathtub, or tile floor. Designed to protect your investments, as soon as water is detected an extra loud 105-decibel alarm sounds. The alarm includes all necessary wall mounting hardware, and a 9-volt battery is required for operation (battery not included). The alarm comes backed with a 1-year limited manufacture's warranty. Emits an extra-loud 105dB alarm when water rises to dangerous levels in sump crock or is detected on floor. Includes 60in. wire sensor which can be suspended in sump crock or attached to floor, bathtub or toilet tank. Battery operated. Recommended Use: Alarm, Senses: Water, Decibel Rating: 105, Power Supply: Battery, Battery Type: 9V, Battery Included: No, Compatible With: Sump and bilge pumps, Low Battery Indicator: Yes, Mount Type: Wall, Single, Pair, or System: Pair

UEI CD100A Leak Detector, Combustible

UEI CD100A Leak Detector, Combustible Review

UEI CD100A Leak Detector, Combustible Feature

• Minimum detection 50 ppm methane
• Long 18" gooseneck for hard to reach areas
• 'Tip-light' in sensor cap illuminates the search area
• Sensor provides accurate detection
• Audio and visual tic rate, fully adjustable

Minimum detection 50 ppm methane Long 18" gooseneck for hard to reach areas 'Tip-light' in sensor cap illuminates the search area Sensor provides accurate detection Audio and visual tic rate, fully adjustable

Do it Best Gas Leak Detector, 2OZ LEAK DETECTOR

Do it Best Gas Leak Detector, 2OZ LEAK DETECTOR Review

Do it Best Gas Leak Detector, 2OZ LEAK DETECTOR Feature

• Plumbing Tools
• Leak Detectors and Test Plugs

Detect any gas leak in just a few seconds on all types of tubing, valves, cylinders, pressurized tanks, or any system under air, gas or oxygen pressure. May be used at temperatures between -50 F. to +160 F. Nontoxic, biodegradable, user friendly, noncorrosive, nonirritating to most skin. 2 oz. plastic spray bottle.

Yellow Jacket 69789 Micro UV LED & Dye Kit- ACR systems

Yellow Jacket 69789 Micro UV LED & Dye Kit- ACR systems Review

Yellow Jacket 69789 Micro UV LED & Dye Kit- ACR systems Feature

• Use these high visibility lamps to spot leaks on all A/C systems
• Individual reflectors surround each of five LEDs recessed for protection in the stainless steel head
• 3 UV and 2 blue bulbs for detection at greater distances
• Constant on or momentary on switch
• Sealing locks out moisture

Yellow Jacket 69789 Micro UV LED & Dye Kit- ACR systems

KLEIN TOOLS 917-25 25-ft Stand-Out (TM) Power Return Tape Measure

KLEIN TOOLS 917-25 25-ft Stand-Out (TM) Power Return Tape Measure Review

KLEIN TOOLS 917-25 25-ft Stand-Out (TM) Power Return Tape Measure Feature

• Durable
• coated blade is 1.06 wide and 10 times stronger than standard coating.

Durable, Coated Blade Is 1.06" Wide; 9' Standout; Vertically Printed Scale On Back Side Of Blade.

Inficon 712-701-G1 D-TEK Replacement Infrared Sensor

Inficon 712-701-G1 D-TEK Replacement Infrared Sensor Review

Inficon 712-701-G1 D-TEK Replacement Infrared Sensor Feature

• Replacement sensor for gas detection
• Enhances sensitivity and long life

Inficon 712-701-G1 D-TEK Select Replacement Infrared Cell Sensor

Water Leak Detector

Water Leak Detector Review

Water Leak Detector Feature

• Battery Operated water leak detector
• sounds an 80 Decible alarm when its sensors are touched by water
• Low Battery indicator

Battery operaterated water leak detector sounds an 80 decible alarm when its sensors are touched by water Low battery indicator

Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm with Battery Backup

Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm with Battery Backup Review

Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm with Battery Backup Feature

• Two alarms in one detects carbon monoxide and explosive gas
• Three convenient mounting options
• Digital display and peak level button displays the peak CO level recorded by the alarm since it was last reset
• Battery backup 9 volt battery included
• Kidde?s carbon monoxide alarms meet the requirements of Underwriters Laboratories (UL), an independent facility that tests products for compliance with widely-accepted safety standards

Protect your family from the dangers of carbon monoxide (CO), methane, and propane exposure with the Kidde KN-COEG-3 Nighthawk Plug-In Carbon Monoxide and Explosive Gas Alarm. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO and explosive gas. The digital display shows if gas is present indicates CO levels in parts per million, allowing you to see if, how, and when levels change.

KN-COEG-3 Nighthawk Carbon Monoxide and Explosive Gas Alarm At a Glance: Plug-in unit with battery backup and continuous digital display Level button displays the peak CO level recorded by the alarm since it was last reset Loud alarm pattern sounds when unit detects elevated levels of CO, methane, or propane gas Direct-plug, 6-foot power cord, and table top mounting options. Five-year limited warranty

This discreet alarm is designed to fit into any standard A/C outlet in your house. View larger.

The easy-read digital display updates every 15 seconds to indicate any abrupt changes or alarming trends in CO levels. View larger.

Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COEG-3 Nighthawk is a UL-listed, A/C-powered, plug-in alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO, methane, and propane exposure. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring--even during power outages.

The Dangers of Carbon Monoxide, Methane, and Propane Exposure
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it's odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Likewise, methane and propane gases are commonly used in homes for cooking, heating, and water heating. Although it happens rarely, gas leaks can sometimes occur inside the home, increasing the risk of fire or explosion.

Audible Alarm Pattern Alerts you to Elevated CO and Gas Levels
When placed on every level of your home, alarms like the KN-COEG-3 Nighthawk can help protect everyone in the house by giving you an unmistakable signal when gas levels have reached an unhealthy point. If unhealthy levels of CO are detected, the alarm will emit four quick audible beeps every five seconds until either levels decrease or the reset button is pressed. If methane gas or propane gas is detected, the alarm will emit beeps every other second with "GAS" shown in the display.

Easy-to-Read Digital Display Shows CO Levels
The KN-COEG-3 Nighthawk is preferred among traditional CO and explosive gas alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored-- from 30 to 999 ppm--and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged. The continuous display also shows if gas is present.

LED Shows Sensor Status
With the KN-COEG-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it's working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options
The KN-COEG-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it's plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COEG-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that's rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world's first wireless networked smoke detectors in 2004.

What's in the Box
Kidde KN-COEG-3 Nighthawk Carbon Monoxide and Explosive Gas Alarm, 9-volt battery, mounting hardware, and installation guide.

Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image.

Nighthawk Carbon Monoxide and Explosive Gas Alarm

MULTI-HAZARD ALARM PROTECTS YOU FROM BOTH CARBON MONOXIDE AND EXPLOSIVE GAS

NEW CO AND EXPLOSIVE GAS ALARM PROTECTS YOU AND YOUR FAMILY FROM TWO DEADLY THREATS. SLEEK DESIGN FITS CONVENIENTLY INTO ANY STANDARD WALL OUTLET.

PROTECTION FROM TWO THREATS: ADVANCED ALARM DETECTS BOTH CARBON MONOXIDE AND EXPLOSIVE GAS

AC PLUG WITH HIDE-A-WAY CORD: ALLOWS DIRECT OR REMOTE PLUG-IN

DIGITAL READOUT OF CO LEVEL: CONTINUOUS READ OUT OF MEASURED CO VALUES FROM 30-999 PPM

LOUD 85 DECIBEL ALARM: ALERTS YOU IF CO OR EXPLOSIVE GAS LEVELS BECOME DANGEROUS

Honeywell C7089U1006 Outdoor Temperature Sensor [Misc.]

Honeywell C7089U1006 Outdoor Temperature Sensor [Misc.] Review

Honeywell C7089U1006 Outdoor Temperature Sensor [Misc.] Feature

• Outdoor temperature for display on the T8600 or T8500 family thermostats.
• Use with PC8900 Control Panel and W8900 Remote Module.
• Used with TH8110U and Th8320U Touchscreen thermostats
• Platinum positive temperature coefficient sensor.
• Factory calibrated; no settings or field calibration required.

Honeywell C7089U1006 Outdoor Temperature Sensor [Misc.]

Control Products WS-04 WaterSiren Plus

Control Products WS-04 WaterSiren Plus Review

Control Products WS-04 WaterSiren Plus Feature

• 90 decibel alarm provides quick alert if you're home.
• Plug into the Deluxe FreezeAlarm (FA-D or FA-D2) and the WA-20 will trigger the FreezeAlarm to call any three phone numbers to warn of a water emergency.
• Detachable water sensor can be placed on floor, inside the lip of a sump, near a water heater, washing tub or machine, or near any plumbing fixture.
• Operates on a 9V alkaline battery (not included).
• Sounds an audible alarm for up to 36 hours on a fully charged 9V battery.

Protect your home from potential disaster from leaking water with this 90-decibel water siren from Protected Home. This battery-operated leak sensor will sound an alert the instant it detects a water leak. For maximum security when you are away from home,

Greenlee KC22-6 Crimping Die for Greenlee 6-Ton Tools, Copper 6 AWG

Greenlee KC22-6 Crimping Die for Greenlee 6-Ton Tools, Copper 6 AWG Review

Greenlee KC22-6 Crimping Die for Greenlee 6-Ton Tools, Copper 6 AWG Feature

• For use with EK628, ECCX, EK22GL, CK22GL, CCCX, HCCX, and RCCX tools
• For copper cable size 6 AWG
• Color code blue

6 AWG Copper Crimping Die - Used with Greenlee EK628, ECCX, EK22GL, CK22GL, CCCX, HCCX, and RCCX tools - Colored Blue for easy identification